Main menu

Talking about paper!!

Elsa Paper Recycling has been built over 50 years. They have an enviable reputation for delivering tailored paper recycling solutions, collecting, sorting and grading recovered paper, that is recycled and distributed to mills throughout the UK, Europe and the Far East

Also as experts in the collection, sorting and grading of recovered Cardboard, Elsa recycling group currently recycle over 700 tonnes per week of paper and Cardboard supplying mills in the UK, Europe, and the far East.

Mach-Tech are pleased to supply and deliver the Urraco 75D to their site based in Manchester .

Flexible, powerful, economical. The Urraco 75D offers all the advantages of technology – in an extremely compact form. Robustly designed and equipped with a high-performance motor, the all-rounder also crushes difficult materials. Depending on mobility requirements, it is available in two chassis versions. Either with  wheel axle and drawbar, suitable for hook lift transport,or with heavy chain traveling gear for off-road mobility on site.

Lindner shredding technologies – certified for operation in line with the DIN standard

Data and document destruction in accordance with the security levels

of standard DIN 66399

The strict DIN 66399 guidelines apply to the destruction of confidential information on paper, film or digital storage devices. Their demands on machines and processes increase in line with the level of confidentiality. To meet the requirements of higher security levels, the Lindner single shaft shredder – and in particular the series Micromat and Komet – were created and certified according to this norm so that you can configure them in line with your needs.

These three protection classes are then subdivided into seven security levels which are explained in great detail. These refer to the possibility of restoring the data after it has been destroyed. The scale ranges from level 1 for the destruction of general data where lower protection is needed (e.g. brochures, newspapers etc.) and where reconstruction of the data presents no data protection problem, right up to level 7 for top-secret data (e.g. secret service or military documents), where the possibility of restoration can be excluded according to the present state of scientific knowledge.
In addition, the DIN 66399 also describes six media categories (see table).
Combined with the individual security levels, the media can be classified as follows:

The class P-5, for example, means the destruction of information in original size such as paper or documents (data carrier group P) of security level 5 for secret data (e.g. medical documents or strategic papers). Once destroyed, this data could only be reconstructed with very dubious methods.

The standard explains in detail that, for the P-5 category, 90 % of the particle size after shredding must not exceed 30 mm² (edge length < 5,5 mm).

Equipment requirements for the destruction of data carriers in line with DIN 66399-2
The ideal shredding machine is selected and configured according to the security level desired. The standard requires that the design of the machine is such that the entire storage device is acquired manually or mechanically and destroyed. In addition, a vertical chute or a capture tray must capture all elements of the destroyed devices. Also, the complete destruction of the media has to be protocolled.
For every machine used, the operator has to prove by means of a test certificate, declaration of conformity, certificate or report that it is able to keep to the specified limits. These documents can be provided by the manufacturer of the machine after the machine type has been examined by an independent expert. For this purpose, the standard also describes in detail the procedure for testing the machine’s suitability. The operator is obligated to randomly check the machine’s compliance with these requirements during operation in order to identify and fix any non-compliance resulting from wear and tear.

Lindner shredding technologies – certified for operation in line with the DIN standard
Thanks to its unique combination of customised cutting system and screen design, the shredding technology of the series Micromat and Komet – which has been tried and tested by an independent institute – guarantees the secure destruction of sensitive material. The individual configurations mean the machines can be adapted to different protection classes including higher security levels (see chart).

Our extremely high-quality, tried-and-tested Lindner shredder components, the machine’s easy maintenance and in particular the cutting gap that can be adjusted while the machine is running all make it possible to easily and effectively combat incorrect grain sizes resulting from wear and tear. That guarantees continuous, standards-compliant output with minimal effort.

Get in touch

"*" indicates required fields

Input Type
Contact consent*

For more information about data consent and how your data is stored, please view the website privacy policy.

This field is for validation purposes and should be left unchanged.